• 1 TEKNİK EĞİTİM FAKÜLTESİ

  Dekan Yardımcısı » Ocak 2007 ile Nisan 2010 tarihleri arasında.

• 2 TEKNİK EĞİTİM FAKÜLTESİ

  Kurul Üyesi » Şubat 2007 ile Şubat 2010 tarihleri arasında.

• 3 TEKNOLOJİ FAKÜLTESİ

  Kurul Üyesi » Aralık 2011 tarihinden itibaren.

• 4 TEKNOLOJİ FAKÜLTESİ

  Yönetim Kurulu Üyesi » Aralık 2014 tarihinden itibaren.

• 5 METALURJİ MÜHENDİSLİĞİ

  Bölüm Başkanı » Kasım 2014 tarihinden itibaren.

• 6 FIRAT ÜNİVERSİTESİ, EĞİTİM KOMİSYONU

  Komisyon Üyesi » Şubat 2007 ile Haziran 2008 tarihleri arasında.

• 7 TEKNOLOJİ FAKÜLTESİ, MALZEME VE METALURJİ MÜHENDİSLİĞİ, ÜRETİM METALURJİSİ ANABİLİM DALI

  ANABİLİM DALI BAŞKANI » Kasım 2011 tarihinden itibaren.

Makaleler

Uluslararası

Yiğit, O., Dikici, B., Şenocak, T.Ç., Özdemir, N., (2020). One-step synthesis of nano-hydroxyapatite/graphene nanosheet hybrid coatings on Ti6Al4V alloys by hydrothermal method and their in-vitro corrosion responses. SURFACE & COATINGS TECHNOLOGY, 394(125858),1-10.
Kırık, İ., Özdemir, N., Sarsılmaz, F., (2018). Microstructure and mechanical properties of friction welded AISI 1040/AISI 304L steels before and after electrochemical corrosion. Materials Testing, 60(1),49-54.
Mercan, S., Özdemir, N., (2017). Weldability characteristics of friction-welded AISI 2205 to AISI 1020 steels. Welding in the World, 61(4),667-677.
Özdemir, N., Sarsılmaz, F., Hasçalık, A., (2007). Effect of rotational speed on the interface properties of friction welded AISI 304L to 4340 steel. Materials Design, 28(1),301-307.
Özdemir, N., Yakuphanoğlu, F., Dayan, O., Dere, A., Şerbetçi, Z., Tataroğlu, A., (2016). Single crystal ruthenium(II) complex dye based photodiode. Dyes and Pigments, 132(),64-71.
Kırık, İ., Özdemir, N., Gülümser, M., Balalan, Z., (2016). Weldability of duplex stainless steels with and without Cu Ni interlayer using plasma arc welding. Materials Testing, 58(9),717-724.
Özdemir, N., (2005). Investigation of the mechanical properties of friction welded joints between AISI 304L and AISI 4340 steel as a function rotational speed. Materials Letters, 59(19-20),2504-2509.
Özdemir, N., Orhan, N., (2005). Microstructure and mechanical properties of friction welded joints of a fine grained hypereutectoid steel with 4 Al. Journal of Materials Processing Technology, 166(1),63-70.
Özdemir, N., , Ö.C., (2006). An investigation on machinability of nodular cast iron by WEDM. The International Journal of Advanced Manufacturing Technology, 28(9-10),869-872.
Eroğlu, M., Özdemir, N., (2002). Tungsten inert gas surface alloying of a low carbon steel. Surface and Coatings Technology, 154(2-3),209-217.
Özdemir, N., Yakuphanoğlu, F., (2006). The effects of particle size and volume fraction of Al2O3 on electronic thermal conductivity of Al2O3 particulate reinforced aluminum composites Al Al2O3MMC. The International Journal of Advanced Manufacturing Technology, 29(3-4),226-229.
Teker, T., , Ö.N., (2012). Weldability and joining characteristics of AISI 430 AISI 1040 steels using keyhole plasma arc welding. International Journal of Advanced Manufacturing Technology, 63(1),117-128.
Kırık, İ., Özdemir, N., Çalıgülü, U., (2013). Effect of particle size and volume fraction of the reinforcement on the microstructure and mechanical properties of friction welded MMC to AA6061. Metallic Materials, (51),221-227.
Kaplan, M., , C.H., , Ö.N., (2012). Is the Elapsed Time following the Placement of a Ventriculoperitoneal Shunt Catheter an Individual Risk Factor for Shunt Fractures. Pediatric Neurosurgery, 48(6),348-351.
Kırık, İ., Özdemir, N., (2015). Effect of process parameters on the microstructure and mechanical properties of friction welded joints of AISI 1040 AISI 304L steels. Materiali in tehnologije, 49(5),825-832.
Özdemir, N., Sedat, B., Sarsılmaz, F., (2010). Mechanical and Microstructural Properties of AA 1030 Aluminum Alloy Plates Joined by Friction Stir Welding. Practical Metallography, 47(3),150-167.
Kırık, İ., Özdemir, N., (2013). Weldability and joining characteristics of AISI 420 AISI 1020 steels using friction welding. International Journal of Materials Research, 104(8),769-775.
Balalan, Z., Özdemir, N., Fırat, E.H., Çalıgülü, U., (2015). Functional ANOVA investigation of the effects of friction welding parameters on the joint characteristics of aluminum based MMC to AISI 304 stainless steel. Materials Testing, 57(6),558-566.
Mercan, S., Aydın, S., Özdemir, N., (2015). Effect of welding parameters on the fatigue properties of dissimilar AISI 2205 AISI 1020 joined by friction welding. International Journal of Fatigue, 81(),78-90.
Tataroğlu, A., Tuncer, H., Ahmed, A.A.G., Dere, A., Arif, B., Yol, S., Özdemir, N., Farid, E., Yakuphanoğlu, F., (2015). Graphene cobalt phthalocyanine based on optoelectronic device for solar panel tracking systems. Synthetic Metals, 206(),15-23.
Özdemir, N., Bilgin, B., (2009). Interfacial properties of diffusion bonded Ti 6Al 4V to AISI 304 stainless steel by inserting a Cu interlayer. The International Journal of Advanced Manufacturing Technology, 41(5-6),519-526.
Özdemir, N., Sarsılmaz, F., Kırık, İ., (2012). Evaluation of Microstructure and Fatigue Properties of Dissimilar AA7075 AA6061 Joints Produced by Friction Stir Welding. Kovove Materialy - Metallic Materials, 50(4),259-268.
Kırık, İ., Özdemir, N., Sarsılmaz, F., (2012). Microstructure and Mechanical Behaviour of Friction Welded AISI 2205 AISI 1040 Steel Joints. MP Material Testing, 54(10),683-688.
Özdemir, N., Orhan, N., Aksoy, M., (2003). Effect of graphite shape in vacuum free diffusion bonding of nodular cast iron with gray cast iron. Journal of Materials Processing Technology, 141(2),228-233.
Hasçalık, A., Ünal, E., Özdemir, N., (2006). Fatigue behaviour of AISI 304 steel to AISI 4340 steel welded by friction welding. Journal of Materials Science, 41(11),3233-3239.
Tatar, C., Özdemir, N., (2010). Investigation of thermal conductivity and microstructure of the Al2O3 particulate reinforced aluminum composites Al Al2O3 MMC by powder metallurgy method. Physica B: Condensed Matter, 405(3),896-899.
Kırık, İ., Özdemir, N., Çalıgülü, U., (2013). Optimization of Tensile Strength of Friction Welded AISI 1040 and AISI 304L Steels According to Statistics Analysis ANOVA. Materials Testing, 55(6),435-441.
Özdemir, N., , S.F., , O.N., (2008). The Effect of Cementite Size and Morphology on the Abrasive Wear Behavior of UHC Steel. Journal of Tribology, 130(2),21602-.
Özdemir, N., , O.N., (2006). Investigation on the superplasticity behavior of ultrahigh carbon steel. Materials & Design, 27(8),706-709.
Teker, T., , Ö.N., (2013). The Effect of Nozzle Orifice Diameter on Penetration Deep and Mechanical Properties of AISI430 AISI1040 Steel Couple Joined by Keyhole PTA Welding Process. Metallic Materials, 51(4),241-249.

Ulusal

Kılıç, M., Beken, M., Özdemir, N., (2019). SHS İşlemi Sonrası Sinterleme İşleminin İntermetalik Kaplamaya Etkisinin İncelenmesi. Fırat Üniversitesi Müh. Bil. Dergisi, 31(1),167-176.
Özdemir, N., , S.F., , B.S., (2007). Sürtünme karıştırma kaynak yöntemi ile birleştirilmiş AA1030 alüminyum alaşımında karıştırıcı uç profili ve ilerleme hızının mekanik özellikler üzerine etkisi. F. Ü. Fen ve Mühendislik Bilimleri Dergisi, 19(4),575-582.
Kırık, İ., , Ö.N., (2012). Otomotiv Endüstrisinde Kullanılan Sürtünme Kaynak Makinesi İmalatı ve Farklı Özellikteki AISI 1040 AISI204L Çelik Çiftlerinin Sürtünme Enerjisi Kullanılarak Birleştirilmesi. e-Journal of New World Sciences Academy, (7),60-72.
Özdemir, N., , B.S., , S.F., (2007). Sürtünme karıştırma kaynak yöntemi ile birleştirilmiş AA1030 alüminyum alaşımında karıştırıcı uç profili ve ilerleme hızının arayüzey mikroyapı değişimi üzerine etkisi. F. Ü. Fen ve Mühendislik Bilimleri Dergisi, 19(3),407-415.
Çay, V.V., , Ö.N., , T.M., (2005). Sürtünme kaynağı ile birleştirilmiş AISI 430 Ç1010 çelik çiftinin arayüzey mikroyapı değerlendirmesi. Teknoloji Dergisi, 8(1),65-70.
Özdemir, N., , O.N., (2002). Yeni tasarlanmış bir sürekli tahrikli sürtümme kaynak makinasının imalatı. Mühendis ve Makina, (508),31-35.

Bildiriler

Uluslararası

Yiğit, O., Gürgenç, T., Şeker, T.S., Özdemir, N., (2020). Producing and Characterization of Boron-doped Strontium Phosphate coating on AZ91D magnesium alloy via Hydrothermal Method. International Conference on Advanced Materials Science Engineeringand High Tech Devices Applications Exhibition (ICMATSE 2020), (),46-.
Yiğit, O., Şenocak, T.Ç., Özdemir, N., (2019). One step nano-hydroxyapatite/graphene coatings produced by Hydrothermal method on Ti6Al4V alloy. 2nd International Conference on Physical Chemistry and Functional Materials (PCFM’19), (),80-.
Özdemir, N., Yiğit, O., (2017). Diffusion bonding of Ti6Al4V alloy to Inconel 718 using Ni İnterlayer. Conference On Materials Science And Nano Technology For Next Generation (MSNG2017), (),180-.
Çiçek, Ö.B., Güner, M., Şeker, T.S., Özdemir, N., (2018). PREPARATION AND CHARACTERIZATION OF HYDROXYAPATITE/POLYETHYLENE NANOCOMPOSITES FOR BIOMEDICAL APPLICATIONS. International Conference onPhysical Chemistry and Functional Materials, (),-.
Çiçek, Ö.B., Şeker, T.S., Güner, M., Özdemir, N., (2018). STUDY on THERMAL, DIELECTRIC and MORPHOLOGY PROPERTIES of ZnO/HDPE NANOCOMPOSITES: PRODUCTION and CHARACTERIZATION. International Conference onPhysical Chemistry and Functional Materials, (),-.
Yiğit, O., Özdemir, N., Şeker, T.S., (2017). Hydrothermal synthesis of nano-hydroxyapatite/Graphene hybrit biocomposite on Ti6Al4V. Nanoostrava 2017, (),42-43.
Yaman, K., Özdemir, N., (2018). Creating Hydroxyapatite by Hydrothermal Method in Ti6Al4VAlloy Surface. INTERNATIONAL CONFERENCE ONINNOVATIVE ENGINEERINGAPPLICATIONS, (),205-212.
Özdemir, N., Balalan, Z., Sarsılmaz, F., Yiğit, O., (2018). Friction Drilling Performance of AZ31 Magnesium Alloy by High SpeedSteel Conical Tool. International Conference on Physical Chemistry and Functional Materials, (),-.
Özdemir, N., Yiğit, O., Şeker, T.S., Güner, M., (2018). PTA Welding of AISI 420 Martensitic Stainless Steel by UsingFiller Metal. INTERNATIONAL CONFERENCE ONINNOVATIVE ENGINEERINGAPPLICATIONS, (),-.
Özdemir, N., Şeker, T.S., (2017). Gas-Tungsten arc welding of AZ31 magnesium Alloy. 4th INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE AND NANOTECHNOLOGY FOR NEXT GENERATION (MSNG2017), (),269-.
Özdemir, N., Yiğit, O., Mızrak, O., (2017). PTA welding of AISI 420 martensitic stainless steel by using AISI 316 filler metal. 8th International AdvancedTechnologies Symposium IATS’17, (),6-.
Dere, A., Özdemir, N., (2017). Production of nano-semiconductor materials for battery applications. 8th International AdvancedTechnologies Symposium IATS’17, (),246-.
Dere, A., Özdemir, N., (2017). An optoelectronic sensor for smart house applications. 8th International AdvancedTechnologies Symposium IATS’17, (),247-.
Özdemir, N., Yiğit, O., Şeker, T.S., (2017). Tungsten inert gas welding of AZ30 magnesium alloy. 8th International AdvancedTechnologies Symposium IATS’17, (),-.
Yiğit, O., Özdemir, N., Şeker, T.S., (2017). Charecterisation of nanohydroxyapatite/graphene hybrit biocomposite produced by hydrothermal method on Ti6Al7Nb alloy. nanoostrava 2017, (),27-.
Özdemir, N., Yiğit, O., Doğan, M.Y., (2017). Plasma transfer arc welding of inconel 718 superalloy. 8th International AdvancedTechnologies Symposium IATS’17, (),5-.
Özdemir, N., Şeker, T.S., (2017). Effect of welding current on microstructural characteristics and tensile properties of GTA welded AZ31 magnesium alloy. CONFERENCE ON MATERIALS SCIENCE ANDNANOTECHNOLOGY FOR NEXT GENERATION(MSNG2017), (),48-.
Balalan, Z., Sarsılmaz, F., Imak, A., Özdemir, N., Ekinci, Ö., (2017). The Investigation of Tribological Properties of Thermal Aged Cual10fe Alloys. 3rd International Iron&Steel Symposium, (),222-227.
Özdemir, N., (). Organic photodetectors for solar tracking system applications. 2 nd International conference on organic elctronic material technologies, (),-.
Özdemir, N., Sarsılmaz, F., Kırık, İ., Yiğit, O., (). Fabrication of porous NiTi alloy implants by SHS. 2nd International conference on organic electronic material technologies, (),-.
Kırık, İ., Özdemir, N., Sarsılmaz, F., Çalıgülü, U., (2016). Microstructure and mechanical properties of pre and post electrochemical corrosion of AISI 1040 AISI 304L steel joined with friction welding. International conference on welding technologies and exhibition, (),-.
Özdemir, N., Yiğit, O., Sarsılmaz, F., (2016). Fabrication of functionally grade biocomposite implant. Nanoscience&nanotechnology for next generation, (),-.
Özdemir, N., Balalan, Z., (2016). Friction welding of Al Cu SiC composite to AISI 304 austenitic stainless steel. Nanoscience&nanotechnology for next generation, (),-.
Mercan, S., Özdemir, N., (2016). Sürtünme kaynağı ile birleştirilen farklı metal çiftlerinde sürtünme süresinin mikroyapı mekanik özelliklere etkisi. 1. International academic research congress, (),62-.
Balalan, Z., Kırık, İ., Özdemir, N., (2015). JOINING OF Al SiCp METAL MATRIX COMPOSITE AND AUSTENITIC STAINLESS STEEL USING FRICTION WELDING. 2nd International Iron and Steel Symposium (IISS’15), (),336-344.
Çavaş, M., Özdemir, N., Yakuphanoğlu, F., Kaya, S., (2015). Electrical and photoconductivity properties of GaZnO p Si Al Photodiode. İnternational Conference on Organic Electronic Material Technologies (OEMT’2015) / 25-28 March 2015, Elazig, Turkey, (),211-211.

Projeler

AZ31 MAGNEZYUM ALAŞIMININ TIG KAYNAĞI İLE BİRLETİRİLEBİLİRLİĞİNİN ARAŞTIRILMASI, 11.03.2016-11.05.2017

Elazığ İli Yenilik Platformu, 01.07.2012-08.11.2017

TEKF 15 03, 21.04.2015-25.04.2016

FÜBAP TEF10 02, -

FÜBAP 1500, -

FÜBAP 1250, -

FÜBAP 1256, -

FÜBAP 1001, -

FÜNAF 478, -

Üyelikler

KAYNAK TEKNOLOJİ DERNEĞİ

Uluslararası, Dergi, JOURNAL OF MOLECULAR STRUCTURE, 1

Uluslararası, Dergi, Fırat Üniversitesi Mühendislik Bilimleri Dergisi, 3